Design and Additive Manufacturing of Medical Face Shield for Healthcare Workers Battling Coronavirus (COVID-19)
During the coronavirus disease-19 pandemic, the demand for specific medical equipment such as personal protective equipment has rapidly exceeded the available supply around the world. Specifically, simple medical equipment such as medical gloves, aprons, goggles, surgery masks, and medical face shields have become highly in demand in the health-care sector in the face of this rapidly developing pandemic. This difficult period strengthens the social solidarity to an extent parallel to the escalation of this pandemic. Education and government institutions, commercial and noncommercial organizations and individual homemakers have produced specific medical equipment by means of additive manufacturing (AM) technology, which is the fastest way to create a product, providing their support for urgent demands within the health-care services. Medical face shields have become a popular item to produce, and many design variations and prototypes have been forthcoming. Although AM technology can be used to produce several types of noncommercial equipment, this rapid manufacturing approach is limited by its longer production time as compared to conventional serial/mass production and the high demand. However, most of the individual designer/maker-based face shields are designed with little appreciation of clinical needs and nonergonomic. They also lack of professional product design and are not designed according to AM (Design for AM [DfAM]) principles. Consequently, the production time of up to 4 – 5 h for some products of these designs is needed. Therefore, a lighter, more ergonomic, single frame medical face shield without extra components to assemble would be useful, especially for individual designers/makers and noncommercial producers to increase productivity in a shorter timeframe. In this study, a medical face shield that is competitively lighter, relatively more ergonomic, easy to use, and can be assembled without extra components (such as elastic bands, softening materials, and clips) was designed. The face shield was produced by AM with a relatively shorter production time. Subsequently, finite element analysis-based structural design verification was performed, and a three-dimensional (3D) prototype was produced by an original equipment manufacturer 3D printer (Fused Deposition Modeling). This study demonstrated that an original face shield design with <10 g material usage per single frame was produced in under 45 min of fabrication time. This research also provides a useful product DfAM of simple medical equipment such as face shields through advanced engineering design, simulation, and AM applications as an essential approach to battling coronavirus-like viral pandemics.
1. World Health Organisation, 2020, Novel Coronavirus (2019-nCoV): Situation Report-1 (21 January 2020). Available from: https://www.who.int/docs/default-source/coronaviruse/situation-reports/20200121-sitrep-1-2019-ncov.pdf?sfvrsn=20a99c10_4. [Last accessed on 2020 Apr 14].
2. World Health Organisation, 2020, Novel Coronavirus (2019-nCoV): Situation Report-22 (11 February 2020). Available from: https://www.who.int/docs/default-source/coronaviruse/situation-reports/20200211-sitrep-22-ncov.pdf?sfvrsn=fb6d49b1_2. [Last accessed on 2020 Apr 14].
3. World Health Organisation, 2020, Novel Coronavirus (Covid-19): Situation Report-51 (11 March 2020). Available from: https://www.who.int/docs/default-source/coronaviruse/situation-reports/20200311-sitrep-51-covid-19. pdf?sfvrsn=1ba62e57_10. [Last accessed on 2020 Apr 14].
4. Joseph B, Joseph M, 2016, The Health of the Healthcare Workers. Indian J Occup Environ Med, 20:71–2.
5. Talikwa L, 2002, Facing up to Wearing Facial Protection Equipment. Manag Inf Control, 2:38.
6. European Centre for Disease Prevention and Control, 2020, Guidance for Wearing and Removing Personal Protective Equipment in Healthcare Settings for the Care of Patients with Suspected or Confirmed COVID-19. Available from: https://www.ecdc.europa.eu/sites/default/files/documents/ COVID-19-guidance-wearing-and-removing-personalprotective-equipment-healthcare-settings-updated.pdf. [Last accessed on 2020 Apr 15]. DOI: 10.12996/gmj.2020.74.
7. National Health Service-England, 2020, COVID-19: Visual Guide to Safe PPE. https://www.assets.publishing.service. gov.uk/government/uploads/system/uploads/attachment_ data/file/878056/PHE_COVID-19_visual_guide_poster_PPE.pdf. [Last accessed on 2020 Apr 15].
8. TMA, 2020, Turkish Medical Association: Use of Personal Protective Equipment (PPE) with Suspected or Confirmed COVID-19. https://www.ttb.org.tr/kollar/COVID19/index. php. [Last accessed on 2020 Apr 15].
9. World Health Organisation, 2020, Rational Use of Personal Protective Equipment for Coronavirus Disease 2019 (COVID-19). (WHO Reference Number: WHO/2019-nCov/IPC PPE_use/2020.1). https://www.apps.who.int/iris/bitstream/handle/10665/331215/WHO-2019-nCov-IPCPPE_use-2020.1-eng.pdf. [Last accessed on 2020 Apr 15]. DOI:10.5222/bmj.2020.22931
10. Roberge RJ, 2016, Face Shields for Infection Control: A Review. J Occup Environ Hyg, 13(4):23542.
11. World Health Organisation, 2020, Shortage of Personal Protective Equipment Endangering Health Workers Worldwide. Available from: https://www.who.int/newsroom/detail/03-03-2020-shortage-of-personal-protectiveequipment-endangering-health-workers-worldwide. [Last accessed on 2020 Apr 14]. DOI: 10.26616/nioshpub2009106
12. Health Protection Scotland, 2020, Standard Infection Control Precautions Literature Review: Personal Protective Equipment (PPE) Eye/Face Protection. Available from: https://www. hpspubsrepo.blob.core.windows.net/hpswebsite/nss/2605/documents/1_sicp-lr-eyewearv2.1.pdf. [Last accessed on 2020 Apr 22].
13. Budynas RG, Nisbett JK, 2011, Shigley’s Mechanical Engineering Design. 9th ed. McGraw-Hill, New York, USA.
14. Kamrani AK, Nasr EA, 2010, Engineering Design and Rapid Prototyping. Springer Science and Business Media, Berlin, Germany. pp. 442–6.
15. Yilmaz S, Seifert CM, 2011, Creativity through Design Heuristics: A Case Study of Expert Product Design. Des Stud, 32:384–415. DOI: 10.1016/j.destud.2011.01.003
16. Matthews C, 1998, Case Studies in Engineering Design. Elsevier, Arnold, London, UK, pp. 272–4.
17. Miles LD, 1989. Techniques of Value Analysis and Engineering. 3rd ed. Lawrence D. Miles Value Foundation, USA.
18. Eppinger S, Ulrich K, 2012, Product Design and Development. 5th ed. McGraw Hill Publishing Company Ltd., New York.
19. Lupeanu ME, Rennie AE, Neagu C, 2011, Additive Manufacturing Technologies and Functional Analysis Used in Product Development Optimization. 12th Rapid Design, Prototyping and Manufacturing Conference, Lancaster, UK. CRDM Ltd., High Wycombe, pp. 105–12.
20. Ruffo M, Tuck C, Hague R, 2006, Cost Estimation for Rapid Manufacturing Laser Sintering Production for Low to Medium Volumes. Proc Inst Mech Eng B J Eng Manuf, 220(9):141727. DOI: 10.1243/09544054jem517
21. Hopkinson N, Dickens P, 2003, Analysis of Rapid Manufacturing Using Layer Manufacturing Processes for Production. Proc Inst Mech Eng C J Mech Eng Sci, 217(1):31–9.
22. Brys G, Hubert M, Struyf A, 2004, A Robust Measure of Skewness. J Comput Graph Stat, 13(4):996–1017.
23. ANSYS Documentation, 2020, Meshing User’s Guide: Skewness. Release 2020 R1, Ansys Inc., USA.
24. Chua CK, Teh SH, Gay RK, 1999. Rapid Prototyping Versus Virtual Prototyping in Product Design and Manufacturing. Int J Adv Manuf Technol, 15(8):597–603. DOI: 10.1007/s001700050107.
25. Tang Y, Zhao YF, 2016, A Survey of the Design Methods for Additive Manufacturing to Improve Functional Performance. Rapid Prototyp J, 22(3):569–90.
26. Booth JW, Alperovich J, Chawla P, et al., 2017, The Design for Additive Manufacturing Worksheet. J Mech Des,139(10):100904.
27. Cang KH, 2014, Product Design Modeling using CAD/CAE the Computer Aided Engineering Design Series. Academic Press, Elsevier Inc., USA. pp. 438–9.
28. Gallagher MB, 2020, 3 Questions: The Risks of Using 3D Printing to Make Personal Protective Equipment. MIT News. Available from: http://www.news.mit.edu/2020/3q-risks-using-3d-printing-make-personalprotective-equipment-0326. [Last accessed on 2020 Apr 29]. DOI: 10.17504/protocols.io.bd77i9rn
29. Jurischka C, Dinter F, Efimova A, et al., 2020, An Explorative Study of Polymers for 3D Printing of Bioanalytical Test Systems. Clin Hemorheol Microcirc, 74:1–28.
30. Clifton W, Damon A, Martin AK, 2020, Considerations and Cautions for Three-Dimensional-Printed Personal Protective Equipment in the COVID-19 Crisis. 3D Print Addit Manuf, 1:1–3. DOI: 10.1089/3dp.2020.0101.
31. Oo-Kuma, 2020, 3D Printing Filaments Technical Data Sheet (ISO) PLA (Polyactic Acid). http://www.oo-kuma.com/uploads/1/4/0/8/14080379/elitepla.pdf. [Last accessed on 2020 Apr 23].
32. Żur P, Kołodziej A, Baier A, 2019, Finite Elements Analysis of PLA 3D-Printed Elements and Shape Optimization. Eur J Eng Sci Technol, 2(1):5964.