3D Printed and Electrospun, Transparent, Hierarchical Polylactic Acid Mask Nanoporous Filter

¹ Department of Polymer Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Műegyetem rkp. 3-9, H-1111, Budapest, Hungary

² Department of Mechatronics, Optics and Engineering Informatics, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Műegyetem rkp. 3-9, H-1111, Budapest, Hungary

³ Department of Electronics Technology, Faculty of Electrical Engineering and Informatics, Budapest University of Technology and Economics, Műegyetem rkp. 3-9, H-1111, Budapest, Hungary

⁴ MTA–BME Research Group for Composite Science and Technology, Műegyetem rkp. 3, H-1111, Budapest, Hungary

IJB 2020, 6(4), 278 https://doi.org/10.18063/ijb.v6i4.278

© Invalid date by the Author(s). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International License ( https://creativecommons.org/licenses/by/4.0/ )

Download PDF

Cite

XML

Abstract

Face masks are becoming one of the most useful personal protective equipment with the outbreak of the coronavirus (CoV) pandemic. The entire world is experiencing shortage of disposable masks and melt-blown non-woven fabrics, which is the raw material of the mask filter. Recyclability of the discarded mask is also becoming a big challenge for the environment. Here, we introduce a facile method based on electrospinning and three-dimensional printing to make changeable and biodegradable mask filters. We printed polylactic acid (PLA) polymer struts on a PLA nanofiber web to fabricate a nanoporous filter with a hierarchical structure and transparent look. The transparent look overcomes the threatening appearance of the masks that can be a feasible way of reducing the social trauma caused by the current CoV disease-19 pandemic. In this study, we investigated the effects of nozzle temperature on the optical, mechanical, and morphological and filtration properties of the nanoporous filter.

Keywords

Coronavirus disease-19

Electrospinning

Mask nanoporous filter

Nanofibers

Three-dimensional printing

References

1. Balazy A, Toivola M, Adhikari A, et al., 2006, Do N95 Respirators Provide 95% Protection Level Against Airborne Viruses, and how Adequate are Surgical Masks? Am J Infect Control, 34:51–7. DOI: 10.1016/j.ajic.2005.08.018.
2. Zhu N, Zhang D, Wang W, et al., 2020, A Novel Coronavirus from Patients with Pneumonia in China, 2019. N Engl J Med, 382:727–33. DOI: 10.1056/NEJMoa2001017.
3. Leung NH, Chu DK, Shiu EY, et al., 2020, Respiratory Virus Shedding in Exhaled Breath and Efficacy of Face Masks. Nat Med, 26:676–80. DOI:10.1038/s41591-020-0843-2.
4. Ronkay FC, 2020, The Coronavirus and Plastics. Express Polym Lett, 14:510–1. DOI: 10.3144/expresspolymlett.2020.41.
5. Wang SX, Yap CC, He J, et al., 2016, Electrospinning: A Facile Technique for Fabricating Functional Nanofibers for Environmental Applications. Nanotechnol Rev, 5: 51-73. DOI: 10.1515/ntrev-2015-0065.
6. Liu Y, Park M, Ding B, et al., 2015, Facile Electrospun Polyacrylonitrile/poly(Acrylic Acid) Nanofibrous Membranes for High Efficiency Particulate Air Filtration. Fiber Polym, 16:629–33. DOI: 10.1007/s12221-015-0629-1.
7. Zhang S, Tang N, Cao L, et al., 2016, Highly Integrated Polysulfone/Polyacrylonitrile/Polyamide-6 Air Filter for Multilevel Physical Sieving Airborne Particles. ACS Appl Mater Interfaces, 8:29062–72. DOI: 10.1021/ acsami.6b10094.
8. Xu J, Liu C, Hsu PC, et al., 2016, Roll-to-Roll Transfer of Electrospun Nanofiber Film for High-Efficiency Transparent Air Filter. Nano Lett, 16:1270–5. DOI: 10.1021/acs. nanolett.5b04596.s001.
9. Rajzer I, Kurowska A, Jabłoński A, et al., 2018, Layered Gelatin/PLLA Scaffolds Fabricated by Electrospinning and 3D Printing- for Nasal Cartilages and Subchondral Bone Reconstruction. Mater Des, 155:297–306. DOI: 10.1016/j. matdes.2018.06.012.
10. Naghieh S, Foroozmehr E, Badrossamay M, et al., 2017, Combinational Processing of 3D Printing and Electrospinning of Hierarchical Poly(Lactic Acid)/Gelatin-forsterite Scaffolds as a Biocomposite: Mechanical and Biological Assessment. Mater Des, 133:128–35. DOI: 10.31224/osf.io/yt6w7.
11. Mendoza-Buenrostro C, Rodriguez CL, 2015, Hybrid Fabrication of a 3D Printed Geometry Embedded with PCL Nanofibers for Tissue Engineering Applications. Procedia Eng, 110:128–34. DOI: 10.1016/j.proeng.2015.07.020.
12. Kozior T, Mamun A, Trabelsi M, et al., 2019, Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites. Polymers (Basel), 11:2034. DOI: 10.3390/ polym11122034.
13. Kozior T, Trabelsi M, Mamun A, et al., 2019, Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing. Polymers (Basel), 11:1618. DOI: 10.3390/ polym11101618.
14. Naghieh S, Badrossamay M, Foroozmehr E, et al., 2017, Combination of PLA Micro-fibers and PCL-Gelatin Nano-fibers for Development of Bone Tissue Engineering Scaffolds. Int J Swarm Intell Evol Comput, 6:1000150. DOI: 10.4172/2090-4908.1000150.
15. Sweeney CB, Lackey BA, Pospisil MJ, et al., 2017, Welding of 3D-printed Carbon Nanotube-polymer Composites by Locally Induced Microwave Heating. Sci Adv, 3:e1700262. DOI: 10.1126/sciadv.1700262.

Previous article in this issue

Next article in this issue

International Journal of Bioprinting, Electronic ISSN: 2424-8002 Print ISSN: 2424-7723, Published by AccScience Publishing