IJB is on its way to Science Citation Index
I am pleased to announce that International Journal of Bioprinting (IJB) – a peer-reviewed, open-access and biannual journal – was recently accepted into Emerging Sources Citation Index (ESCI) by Clarivate Analytics (formerly known as Thomson Reuters).
1. Vaezi M and Chua, C K, 2011, Effects of layer thickness and binder saturation level parameters on 3D printing process. The International Journal of Advanced Manufacturing Technology, vol.53(1–4): 275–284.
https://dx.doi.org/10.1007/s00170-010-2821-1
2. Lee J M, Yeong W Y, 2015, A preliminary model of time-pressure dispensing system for bioprinting based on printing and material parameters. Virtual and Physical Prototyping, vol.10(1): 3–8.
https://dx.doi.org/10.1080/17452759.2014.979557
3. Loh L E, Chua C K, Yeong W Y,et al., 2015, Numerical investigation and an effective modelling on the selective laser melting (slm) process with aluminium alloy 6061. International Journal of Heat and Mass Transfer, vol.80: 288–300.
https://dx.doi.org/10.1016/j.ijheatmasstransfer.2014.09.014
4. Cheah C M, Leong K F, Chua C K, et al., 2002, Characterization of microfeatures in selective laser sintered drug delivery devices. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol.216(6): 369–383.
https://dx.doi.org/10.1243/095441102321032166
5. Khoo Z X, Teoh J E M, Liu Y, et al., 3D printing of smart materials: A review on recent progresses in 4D printing. Virtual and Physical Prototyping, vol.10(3): 103–122.
https://dx.doi.org/10.1080/17452759.2015.1097054
6. Leist S K and Zhou J, 2016, Current status of 4D printing technology and the potential of light-reactive smart materials as 4D printable materials. Virtual and Physical Prototyping, vol.11(4): 249–262.
https://dx.doi.org/10.1080/17452759.2016.1198630
7. Zhang Y, 2017, Post-3D printing modification for improved biomedical applications. International Journal of Bioprinting, vol.3(2): 93–99.
https://dx.doi.org/10.18063/IJB.2017.02.001
8. Sklare S C, Richey W L, Vinson B T, et al., 2017, Directed self-assembly software for single cell deposition. International Journal of Bioprinting, vol.3(2): 100–108.
https://dx.doi.org/10.18063/IJB.2017.02.006
9. Datta P, Dhawan A, Yu Y, et al., 2017 Bioprinting of osteochondral tissues: A perspective on current gaps and future trends. International Journal of Bioprinting, vol.3(2): 109–120.
https://dx.doi.org/10.18063/IJB.2017.02.007
10. Shi P, Tan Y S E, Yeong W Y, et al., 2017, Hybrid three-dimensional (3D) bioprinting of retina equivalent for ocular research. International Journal of Bioprinting, vol.3(2): 138–146.
https://dx.doi.org/10.18063/IJB.2017.02.008
11. Sachan R, Jaipan P, Zhang J Y, et al., 2017, Printing amphotericin B on microneedles using matrix assisted pulsed laser evaporation. International Journal of Bioprinting, vol.3(2): 147–157.
https://dx.doi.org/10.18063/IJB.2017.02.004
12. Zhou M, Lee B H, Tan L P, 2017, A dual crosslinking strategy to tailor rheological properties of gelatin methacryloyl. International Journal of Bioprinting, vol.3(2): 130–137.
https://dx.doi.org/10.18063/IJB.2017.02.003
13. Dias J R, dos Santos C, Horta J, et al., 2017, A new design of an electrospinning apparatus for tissue engineering applications. International Journal of Bioprinting, vol.3(2): 121–129.
https://dx.doi.org/10.18063/IJB.2017.02.002
14. Tran T, 2017, Book review – Standards, quality control, and measurement sciences in 3D printing and additive manufacturing. International Journal of Bioprinting, vol.3(2): 158.
https://dx.doi.org/10.18063/IJB.2017.02.009