Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide
In recent years, hydrogels have been used as important biomaterials for 3D printing of three dimensional tissues or organs. The key issue for printing a successful scaffold is the selection of a material with a good printability. Rheological properties of hydrogels are believed to pay an important role in 3D printability. However the relations between rheological properties of hydrogels and 3D printability have not been extensively studied. In this study, alginate-based hydrogels were prepared as a model material for an extrusion-based printer and graphene oxide was added to modify the rheological properties and 3D printability of the hydrogels. Rheological studies were performed for the hydrogel samples with different formulas. The range of shear rates that the hydrogels suffered during the printing process was deduced. This range of shear rates helped us to select a proper shear rate to investigate the thixotropic properties of the hydrogels. Furthermore, we also defined some measureable parameters to describe and discuss the quality of 3D printing. The present study shows a new approach to analysis of 3D printability of a hydrogel and also provides some suggestion for 3D printing of 3D scaffolds.
[1] Ozbolat IT, Yu Y. Bioprinting toward organ fabrication: challenges and future trends. Biomedical Engineering, IEEE Transactions on 2013;60:691-9.
[2] Zhang Y, Tse C, Rouholamin D, Smith P. Scaffolds for tissue engineering produced by inkjet printing. centeurjeng 2012;2:325-35.
[3] Murphy SV, Atala A. 3D bioprinting of tissues and organs. Nature biotechnology 2014;32:773-85.
[4] Billiet T, Vandenhaute M, Schelfhout J, Van Vlierberghe S, Dubruel P. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. Biomaterials 2012;33:6020-41.
[5] Cohen DL, Tsavaris AM, Lo WM, Bonassar LJ, Lipson H. Improved quality of 3D-printed tissue constructs through enhanced mixing of alginate hydrogels. Proceedings of the Nineteenth Solid Freeform Fabrication Symposium2008. p. 4-6.
[6] Jia J, Richards DJ, Pollard S, Tan Y, Rodriguez J, Visconti RP, et al. Engineering alginate as bioink for bioprinting. Acta biomaterialia 2014;10:4323-31.
[7] Kirchmajer D, Gorkin III R. An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing. Journal of Materials Chemistry B 2015;3:4105-17.
[8] Landers R, Hübner U, Schmelzeisen R, Mülhaupt R. Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. Biomaterials 2002;23:4437-47.
[9] Song SJ, Choi J, Park YD, Lee JJ, Hong SY, Sun K. A Three‐Dimensional Bioprinting System for Use With a Hydrogel‐Based Biomaterial and Printing Parameter Characterization. Artificial organs 2010;34:1044-8.
[10] Zhu J, Marchant RE. Design properties of hydrogel tissue-engineering scaffolds. Expert review of medical devices 2011;8:607-26.
[11] Fan J, Shang Y, Yuan Y, Yang J. Preparation and characterization of chitosan/galactosylated hyaluronic acid scaffolds for primary hepatocytes culture. J Mater Sci: Mater Med 2010;21:319-27.
[12] Hunt JA, Chen R, van Veen T, Bryan N. Hydrogels for tissue engineering and regenerative medicine. Journal of Materials Chemistry B 2014;2:5319-38.
[13] Beyer M, Reichert J, Heurich E, Jandt KD, Sigusch BW. Pectin, alginate and gum arabic polymers reduce citric acid erosion effects on human enamel. Dental Materials 2010;26:831-9.
[14] Li Z, Ramay HR, Hauch KD, Xiao D, Zhang M. Chitosan–alginate hybrid scaffolds for bone tissue engineering. Biomaterials 2005;26:3919-28.
[15] Bao H, Pan Y, Ping Y, Sahoo NG, Wu T, Li L, et al. Chitosan‐Functionalized Graphene Oxide as a Nanocarrier for Drug and Gene Delivery. Small 2011;7:1569-78.
[16] Rodríguez-González C, Martínez-Hernández AL, Castaño VM, Kharissova OV, Ruoff RS, Velasco-Santos C. Polysaccharide Nanocomposites Reinforced with Graphene Oxide and Keratin-Grafted Graphene Oxide. Industrial & Engineering Chemistry Research 2012;51:3619-29.
[17] Fan H, Wang L, Zhao K, Li N, Shi Z, Ge Z, et al. Fabrication, mechanical properties, and biocompatibility of graphene-reinforced chitosan composites. Biomacromolecules 2010;11:2345-51.
[18] Sui Z, Zhang X, Lei Y, Luo Y. Easy and green synthesis of reduced graphite oxide-based hydrogels. Carbon 2011;49:4314-21.
[19] Chen H, Müller MB, Gilmore KJ, Wallace GG, Li D. Mechanically Strong, Electrically Conductive, and Biocompatible Graphene Paper. Advanced Materials 2008;20:3557-61.
[20] Meyer JC, Geim AK, Katsnelson MI, Novoselov KS, Booth TJ, Roth S. The structure of suspended graphene sheets. Nature 2007;446:60-3.
[21] Ionita M, Pandele MA, Iovu H. Sodium alginate/graphene oxide composite films with enhanced thermal and mechanical properties. Carbohydrate polymers 2013;94:339-44.
[22] Chung JH, Naficy S, Yue Z, Kapsa R, Quigley A, Moulton SE, et al. Bio-ink properties and printability for extrusion printing living cells. Biomaterials Science 2013;1:763-73.
[23] Liu Y, Ling S, Wang S, Chen X, Shao Z. Thixotropic silk nanofibril-based hydrogel with extracellular matrix-like structure. Biomaterials Science 2014;2:1338-42.
[24] Ohsedo Y, Oono M, Saruhashi K, Watanabe H, Miyamoto N. A new composite thixotropic hydrogel composed of a low-molecular-weight hydrogelator and a nanosheet. RSC Advances 2014;4:44837-40.
[25] Talbot EL, Yang L, Berson A, Bain CD. Control of the Particle Distribution in Inkjet Printing through an Evaporation-Driven Sol–Gel Transition. ACS Applied Materials & Interfaces 2014;6:9572-83.
[26] Barnes HA. Thixotropy—a review. Journal of Non-Newtonian Fluid Mechanics 1997;70:1-33.
[27] Chhabra RP, Richardson JF. Non-Newtonian flow and applied rheology: engineering applications: Butterworth-Heinemann; 2011.
[28] Coulson JM, Richardson JF, Backhurst JR, Harker JH. Coulson and Richardson's Chemical Engineering Volume 1 - Fluid Flow, Heat Transfer and Mass Transfer (6th Edition). Elsevier.
[29] Winter HH, Chambon F. Analysis of linear viscoelasticity of a crosslinking polymer at the gel point. Journal of Rheology (1978-present) 1986;30:367-82.
[30] Li L, Aoki Y. Rheological Images of Poly(vinyl chloride) Gels. 1. The Dependence of Sol−Gel Transition on Concentation. Macromolecules 1997;30:7835-41.
[31] Te Nijenhuis K, Winter HH. Mechanical properties at the gel point of a crystallizing poly(vinyl chloride) solution. Macromolecules 1989;22:411-4.
[32] Habas J-P, Pavie E, Lapp A, Peyrelasse J. Understanding the complex rheological behavior of PEO–PPO–PEO copolymers in aqueous solution. Journal of Rheology 2004;48:1-21.
[33] Liu S, Yu W, Zhou C. Solvents effects in the formation and viscoelasticity of DBS organogels. Soft Matter 2013;9:864-74.
[34] Tadros TF. Rheology of dispersions: principles and applications: John Wiley & Sons; 2011.