Artificial vascularized scaffolds for 3D-tissue regeneration — a report of the ArtiVasc 3D Project
The aim of this paper is to raise awareness of the ArtiVasc 3D project and its findings. Vascularization is one of the most important and highly challenging issues in the development of soft tissue. It is necessary to supply cells with nutrition within a multilayer tissue, for example in artificial skin. Research on artificial skin is driven by an increasing demand for two main applications. Firstly, for the field of regenerative medicine, the aim is to provide patients with implants or grafts to replace damaged soft tissue after traumatic injuries or ablation surgery. Secondly, another aim is to substitute expensive and ethically disputed pharmaceutical tests on animals by providing artificial vascularized test beds to simulate the effect of pharmaceuticals into the blood through the skin. This paper provides a perspective on ArtiVasc 3D, a major European Commission funded project that explored the development of a full thickness, vascularized artificial skin. The paper provides an overview of the aims and objectives of the project and describes the work packages and partners involved. The most significant results of the project are summarized and a discussion of the overall success and remaining work is given. We also provide the journal papers resulting from the project.
1. ArtiVasc 3D, n.d., viewed August 30, 2015, http://www.artivasc.eu/
2. Engelhardt S, Wehner M and Refle O, 2012, Method for the fabrication of macroscopic high resolution scaffolds by the combination of inkjet printing and laser initiated polymerization. Journal of Tissue Engineering and Re-generative Medicine, vol.6: 299–300. http://dx.doi.org/10.1002/term.1586
3. Hoch J, Tovar G and Borchers K, 2014, Photopolymerizable and non-gelling gelatin for the preparation of tissue substitutes by additive manufacturing techniques. Journal of Tissue Engineering and Regenerative Medicine, vol.8: 446. http://dx.doi.org/10.1002/term.1932
4. Hoch E, Tovar G and Borchers K, 2014, Bioprinting of artificial blood vessels — current approaches towards a demanding goal. European Journal of Cardiothoracic Surgery, vol.46(5): 767–778. http://dx.doi.org/10.1093/ejcts/ezu242
5. Hoch E, Hirth T, Tovar G, et al., 2013, Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting. Journal of Materials Chemistry B, vol.1: 5675–5685. http://dx.doi.org/10.1039/C3TB20745E
6. Seiler N, Bremus-Köbberling E, Leonhäuser D, et al., 2012, Gradients for cell guidance — functionalization by UV-laser-irradiation. Journal of Tissue Engineering and Regenerative Medicine, vol.6: 373–374. http://dx.doi.org/10.1002/term.1586
7. Kessler L, Huber B, Hoch E, et al., 2014, Cross-linked hydrogels as a potential tool for soft tissue engineering. Journal of Tissue Engineering and Regenerative Medicine, vol.8: 353. http://dx.doi.org/10.1002/term.1932
8. Gugerell A, Kober J, Laube T, et al., 2014, Electrospun poly(ester-urethane) and poly(ester-urethane-urea) fleeces as promising tissue engineering scaffolds for adipose-derived stem cells. PLOS ONE, vol.9(3): e90676. http://dx.doi.org/10.1371/journal.pone.0090676
9. Gugerell A, Neumann A, Kober J, et al., 2014, Adipose derived stem cells cultivated on electrospun L-lactide/glycolide copolymer fleeces and gelatine hydrogels under flow conditions — aiming physiological reality in hypodermis tissue engineering. Burns, vol.41(1): 163–171. http://dx.doi.org/10.1016/j.burns.2014.06.010
10. Tammaro L, Vittoria V, Wyrwa R, et al., 2014, Fabrication and characterization of electrospun polylactide/β-tricalcium phosphate hybrid meshes for potential applications in hard tissue repair. BioNanoMaterials, vol.15: 9–20. http://dx.doi.org/10.1515/bnm-2014-0001
11. Han X, Bibb R and Harris R, 2015, A junction rounding method for the efficient design of bifurcation vascular vessels in skin tissue engineering for additive manufacturing. Journal of Visual Languages and Computing, vol.28: 238–249. http://dx.doi.org/10.1016/j.jvlc.2014.12.005
12. Han X, Bibb R and Harris R, 2015, Artificial Vascular Bifurcations — Design and Modelling, Procedia CIRP, in press.
13. Engelhardt S, Tempeler J and Wehner M, 2015, The voxel onset time as an in situ method to evaluate focal position effects on two-photon-induced lithography. Applied Physics A, vol.121(2): 513–519. http://dx.doi.org/10.1007/s00339-015-9449-9
14. Huber B, Klechowitz N, Borchers K, et al., 2012, Isolation and culture of primary human subcutaneous adipocytes and construction of a fatty tissue equivalent. Bio-Nano Materials, vol.13(1–4): 195. http://dx.doi.org/10.1515/bnm-2012-0015
15. Huber B, Borchers K, Tovar G E M, et al., 2016, Methacrylated gelatin and mature adipocytes are promising components for adipose tissue engineering. Journal of Biomaterials Applications, vol.30(6): 699–710. http://dx.doi.org/10.1177/0885328215587450
16. Keck M, Kober J, Schnabelrauch M, et al., 2014, Generation of the hypodermis in a vascularized three layered skin substitute. Journal of Tissue Engineering and Regenerative Medicine, vol.8: 99. http://dx.doi.org/10.1002/term.1931
17. Kluger P, Huber B, Hoch E, et al., 2014, Development of soft tissue equivalents — build up with mature adipocytes in a gelatin hydrogel. BioNanoMaterials, vol.15(S1): 42.
http://dx.doi.org/10.1515/bnm-2014-9006
18. Kober J, 2015, Adipose tissue stem cells and secretomes for advanced skin tissue engineering, doctoral thesis, Medical University of Vienna, viewed June 30, 2015, http://permalink.obvsg.at/AC10777441
19. Huber B, Volz A C and Kluger P J, 2015, How do culture media influence in vitro perivascular cell behavior? Cell Biology International, vol.39(12): 1395–1407. http://dx.doi.org/10.1002/cbin.10515
20. Khoo Z X, Teoh J E M, Liu Y, et al., 2015, 3D printing of smart materials: A review on recent progresses in 4D printing. Virtual and Physical Prototyping, vol.1(3): 103–122. http://dx.doi.org/10.1080/17452759.2015.1097054