AccScience Publishing / IJB / Volume 10 / Issue 2 / DOI: 10.36922/ijb.0140
Submit to IJB
Cite this article
23
Download
484
Views
Journal Browser
Volume | Year
Issue
Search
Forthcoming Issue
Current Issue
View All
News and Announcements
View All
RESEARCH ARTICLE

Manufacturing evaluation of seven medical device companies during the production of a 3D-printed titanium pelvic implant

Alba González Álvarez1,2* ,  Rubén Pérez Mañanes2,3,4,5 ,  José Antonio Calvo Haro2,3,4,5 ,  Lydia Mediavilla Santos2,3,5 ,  Javier Pascau1,2
Show Less
1 Departamento de Bioingeniería, Universidad Carlos III de Madrid, Madrid, Spain
2 Instituto de Investigación Sanitaria Gregorio Marañón (IiSGM), Hospital General Universitario Gregorio Marañón, Madrid, Spain
3 Servicio de Cirugía Ortopédica y Traumatología, Hospital General Universitario Gregorio Marañón, Madrid, Spain
4 Departamento de Cirugía, Universidad Complutense de Madrid, Madrid, Spain
5 Advanced Planning and 3D Manufacturing Unit (UPAM3D), Hospital Gregorio Marañón, Madrid, Spain
IJB 2024, 10(2), 0140 https://doi.org/10.36922/ijb.0140
Submitted: 27 April 2023 | Accepted: 24 July 2023 | Published: 31 January 2024
© 2024 by the Author(s). This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International License ( https://creativecommons.org/licenses/by/4.0/ )
Download PDF
Cite
XML
Abstract

Powder bed fusion (PBF) technology has become a popular manufacturing method to fabricate custom metallic implants. This trend has generated some regulatory concerns because traditional developing guidelines are not suitable for three-dimensional (3D)-printed implants. This is due to the layered microstructure of additive manufactured parts that produces mechanical properties different than those of traditionally manufactured parts. The inappropriate choice of the process parameters and postprocessing methods can lead to fabrication errors that could negatively affect mechanical properties and dimensional accuracy. The objective of the study was to perform a preliminary evaluation of the quality of manufacturing provided by the medical device industry and identify the best 3D printing practices. We designed a pelvic bone reconstructing implant and asked seven companies to manufacture it in Ti6Al4V with PBF technology. We inspected some important aspects of the manufacturing quality of the prototypes received by evaluating geometrical precision and microstructural integrity in the surface and in the matrix, including a qualitative assessment of voids and grain morphology. Results demonstrated a great difference among the implant prototypes. Two companies proved to be superior and provided defect-free implants. The other five produced evidence of some defects including: geometrical deviations (maximum values of up to 5 mm); heterogeneous acicular grain morphologies; broken sections of lattice structures; and internal and superficial voids and cracks that could potentially compromise functional and clinical performance. To our knowledge, this is the first study analyzing the production of several custom implant additive manufacturers based on a geometrical and microstructural evaluation of the same pelvic implant fabrication. The imperfections found in some prototypes produced by companies certified to commercialize personalized implants highlight the urgent need for technical standards that regulate the safe development of 3D-printed implants. Further analyses are required to determine the actual clinical and mechanical consequences of such imperfections. The results also show that when additive manufacturing is adequately managed, it can be a valid manufacturing method to fabricate defect-free implants.

Keywords
Custom implants
Ti6Al4V
Powder bed fusion
Implant quality
Defects
Quality control
Funding
This research was supported by the CONEX-Plus program funded by Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 801538.
References
  1. Villapún VM, Carter LN, Avery S, González-Álvarez A, Andrews JW, Cox S. Stakeholder perspectives on the current and future of additive manufacturing in healthcare. Int J Bioprint. 2022;8(3):586. doi: 10.18063/ijb.v8i3.586
  2. Food and Drug Administration. Technical Considerations for Additive Manufactured Medical Devices: Guidance for Industry and Food and Drug Administration Staff Document. Center for Devices and Radiological Health. New Hampshire: USA. 2017;1-30. https://www.fda.gov/regulatory-information/search-fda-guidance-documents/technical-considerations-additive-manufactured-medical-devices (accessed on 16 January 2024).
  3. Gong H, Rafi K, Gu H, Janaki Ram GD, Starr T, Stucker B. Influence of defects on mechanical properties of Ti–6Al– 4V components produced by selective laser melting and electron beam melting. Mater Des. 2015;86:545-554. doi: 10.1016/j.matdes.2015.07.147
  4. Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017 on Medical Devices. https://eur-lex.europa.eu/legal-content/EN/TXT/ PDF/?uri=CELEX:32017R0745 (accessed on 6 March 2023).
  5. ISO 13485:2016, Quality Management Systems. International Organization for Standardization, Geneva, Switzerland. https://www.iso.org/standard/59752.html (accessed on March 6, 2023).
  6. Chiarini A. Effect of ISO 9001 non-conformity process on cost of poor quality in capital-intensive sectors. Int J Qual Reliab Manag. 2015;32(2):144-155. doi: 10.1108/IJQRM-03-2013-0041
  7. Wong K-C, Scheinemann P. Additive manufactured metallic implants for orthopaedic applications. Sci China Mater. 2018;61(4):440-454. doi: 10.1007/s40843-017-9243-9
  8. Hothi H, Henckel J, Bergiers S, Laura AD, Schlueter-Brust K, Hart A. The analysis of defects in custom 3D-printed acetabular cups: A comparative study of commercially available implants from six manufacturers. J Orthop Res. 2022;(October):1-12. doi: 10.1002/jor.25483
  9. Martinez-Marquez D, Delmar Y, Sun S, Stewart RA. Exploring macroporosity of additively manufactured titanium metamaterials for bone regeneration with quality by design: A systematic literature review. Materials (Basel). 2020;13(21):1-44. doi: 10.3390/ma13214794
  10. Liu X, Chu PK, Ding C. Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater Sci Eng R Rep. 2004;47(3): 49-121. doi: 10.1016/j.mser.2004.11.001
  11. Gonzalez Alvarez A, Dearn KD, Lawless BM, et al. Design and mechanical evaluation of a novel dynamic growing rod to improve the surgical treatment of early onset scoliosis. Mater Des. 2018;155:334-345. doi: 10.1016/j.matdes.2018.06.008
  12. Tammas-Williams S, Withers PJ, Todd I, Prangnell PB. The effectiveness of hot isostatic pressing for closing porosity in titanium parts manufactured by selective electron beam melting. Metall Mater Trans A Phys Metall Mater Sci. 2016;47(5):1939-1946. doi: 10.1007/s11661-016-3429-3
  13. Barrère F, Mahmood TA, de Groot K, van Blitterswijk CA. Advanced biomaterials for skeletal tissue regeneration: Instructive and smart functions. Mater Sci Eng R Rep. 2008;59(1):38-71. doi: 10.1016/j.mser.2007.12.001
  14. Suska F, Kjeller G, Tarnow P, et al. Electron beam melting manufacturing technology for individually manufactured jaw prosthesis: A case report. J Oral Maxillofac Surg. 2016;74(8):1706.e1-1706.e15. doi: 10.1016/j.joms.2016.03.046
  15. Martinez-Marquez D, Mirnajafizadeh A, Carty CP, Stewart RA. Application of quality by design for 3D printed bone prostheses and scaffolds. PLoS ONE. 2018;13(4):1-47. doi: 10.1371/journal.pone.0195291
  16. Van Hooreweder B, Moens D, Boonen R, Kruth JP, Sas P. Analysis of fracture toughness and crack propagation of Ti6Al4V produced by selective laser melting. Adv Eng Mater. 2012;14(1–2):92-97. doi: 10.1002/adem.201100233
  17. Vrancken B, Thijs L, Kruth JP, Humbeeck JV. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties. J Alloys Compd. 2012;541:177-185. doi: 10.1016/j.jallcom.2012.07.022
  18. Vilaro T, Colin C, Bartout D. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Metall Mater Trans A. 2011;42(10):3190-3199. doi: 10.1007/s11661-011-0731-y
  19. Li SJ, Murr LE, Cheng XY, et al. Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting. Acta Mater. 2012;60(3):793-802. doi: 10.1016/j.actamat.2011.10.051
  20. Fotovvati B, Namdari N, Dehghanghadikolaei A. Fatigue performance of selective laser melted Ti6Al4V components: State of the art. Mater Res Express. 2019;6(1):012002. doi: 10.1088/2053-1591/aae10e
  21. Vaneker T, Bernard A, Moroni G, Gibson I, Zhang Y. Design for additive manufacturing: Framework and methodology. CIRP Ann. 2020;69(2):578-599. doi: 10.1016/j.cirp.2020.05.006
  22. Coelho PG, Hollister SJ, Flanagan CL, Fernandes PR. Bioresorbable scaffolds for bone tissue engineering: Optimal design, fabrication, mechanical testing and scale-size effects analysis. Med Eng Phys. 2015;37(3):287-296. doi: 10.1016/j.medengphy.2015.01.004
  23. Kingsak M, Maturavongsadit P, Jiang H, Wang Q. Cellular responses to nanoscale substrate topography of TiO2 nanotube arrays: cell morphology and adhesion. Biomater Transl. 2022;3(3):221-233. doi: 10.12336/biomatertransl.2022.03.006
  24. Liu QC, Elambasseril J, Sun SJ, Leary M, Brandt M, Sharp PK. The effect of manufacturing defects on the fatigue behaviour of Ti-6Al-4V specimens fabricated using selective laser melting. Adv Mater Res. 2014;891–892:1519-1524. doi: 10.4028/www.scientific.net/AMR.891-892.1519
  25. Seth P, Jha JS, Alankar A, Mishra SK. Alpha-case formation in Ti–6Al–4V in a different oxidizing environment and its effect on tensile and fatigue crack growth behavior. Oxid Met. 2022;97(1–2):77-95. doi: 10.1007/s11085-021-10079-y
  26. Lee YS, Cho S, Ji C, Jo I, Choi M. Impact of morphology on the high cycle fatigue behavior of Ti-6Al-4V for aerospace. Metals (Basel). 2022;12(10):1722. doi: 10.3390/met12101722
  27. Xu W, Sun S, Elambasseril J, Liu Q, Brandt M, Qian M. Ti- 6Al-4V additively manufactured by selective laser melting with superior mechanical properties. JOM. 2015;67(3): 668-673. doi: 10.1007/s11837-015-1297-8
  28. Bertsch KM, Voisin T, Forien JB, et al. Critical differences between electron beam melted and selective laser melted Ti- 6Al-4 V. Mater Des. 2022;216:110533. doi: 10.1016/j.matdes.2022.110533
  29. Wu GQ, Shi CL, Sha W, Sha AX, Jiang HR. Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys. Mater Des. 2013;46:668-674. doi: 10.1016/j.matdes.2012.10.059
  30. Frkan M, Konecna R, Nicoletto G, Kunz L. Microstructure and fatigue performance of SLM-fabricated Ti6Al4V alloy after different stress-relief heat treatments. Transp Res Procedia. 2019;40(1):24-29. doi: 10.1016/j.trpro.2019.07.005
  31. Ran J, Jiang F, Sun X, Chen Z, Tian C, Zhao H. Microstructure and mechanical properties of ti-6al-4v fabricated by electron beam melting. Crystals. 2020;10(11):1-18. doi: 10.3390/cryst10110972
  32. Gonzalez Alvarez A, Dovgalski L, Evans PL, Key S. Development and surgical application of a custom implant that enables a vertical vector of mandibular distraction. Proc Inst Mech Eng H. 2020;234(10):1172-1180. doi: 10.1177/0954411920940848
  33. Gonzalez Alvarez A, Evans PL, Dovgalski L, Goldsmith I. Design, additive manufacture and clinical application of a patient-specific titanium implant to anatomically reconstruct a large chest wall defect. Rapid Prototyp J. 2021;27(2): 304-310. doi: 10.1108/RPJ-08-2019-0208
  34. Gonzalez Alvarez A, Ananth S, Dovgalski L, Evans PL. Custom three-dimensional printed orbital plate composed of two joined parts with variable thickness for a large orbital floor reconstruction after post-traumatic zygomatic fixation. Br J Oral Maxillofac Surg. 2020;58(10):e341-e342. doi: 10.1016/j.bjoms.2020.08.082
  35. Contaldi V, Corrado P, Del Re F, et al. Direct metal laser sintering of Ti-6Al-4V parts with reused powder. Int J Adv Manuf Technol. 2022;120(1–2):1013-1021. doi: 10.1007/s00170-022-08807-y
  36. Emminghaus N, Bernhard R, Hermsdorf J, Kaierle S. Residual oxygen content and powder recycling: Effects on microstructure and mechanical properties of additively manufactured Ti-6Al-4V parts. Int J Adv Manuf Technol. 2022; 121(5–6):3685-3701. doi: 10.1007/s00170-022-09503-7
Conflict of interest
The authors declare no conflicts of interest.
Share
Back to top
International Journal of Bioprinting, Electronic ISSN: 2424-8002 Print ISSN: 2424-7723, Published by AccScience Publishing
We use cookies on our website to ensure you get the best experience.
Read more about our cookies here
Accept